Orbea MX30 2017

CONVERSION RATING

**** Good (no modifications but some extra parts needed)

Share on facebook
SHARE ON FACEBOOK

Conversion specs

Motor:
TYPE:
System voltage: 52v
Battery type: Down tube underside mount

Bike specs

Brand:
Model:
Model year: 2017
Frame Size: 15 – 16 inches (S)
Wheel Size: 27.5
BB Type: Unsure/unknown
BB Width: 73mm

About the author

About this conversion

here’s mine:
Orbea MX30 27.5 Small frame
bottom bracket size: 73mm (I only found this out when i removed the bottom bracket during my installation of the motor hehe)
Cabling: Rear / Front Derailleur (internal routed – top downtube in – buttom downtube out, few inches above the bottom bracket)

Bottle Battery 52v 11ah Click image for larger version

if i’m going to start over i’ll go with medium up to xlarge MTB frame coz with a small frame like mine its hard / impossible to fit any battery on the downtube, but if you will go for hybrids, roadbike and some less agressive frame i think you should be fine regardless of size.

Extra parts and modifications used for this conversion

spacers used: 1 small (the smallest luna cycle offers) – MUST HAVE
tire tested: 27.5 x 2.2 & 2.4 (i prefer 2.1-2.2 size)
chainring: lekkie bling HD (MUST HAVE)
additional accessory: C-guide by bionicon (this will avoid chain from jumping off the chainring)

Image Gallery